The MTA roof leak detector is an innovative leak detection device suitable for all types of flat roofs.

Using the MTA roof leak detector can accurately locate leaks without the need for time-consuming preparation work such as removing gravel from the testing area. To conduct the test, all you need is a properly connected grounding cable and enough water to wet the test area. The grounding cable creates a voltage circuit for electronic devices.

The test only needs to be carried out while driving on the roof. This technology is based on the principle of material conductivity and can efficiently detect leaks on roof surfaces.

The integrated software transmits test data in real-time to the display. The software also provides the option to export test reports to PDF format for internal reporting.

The convenient structure and practical transportation box make the MTA roof leak detector a reliable companion for leak detection operations. Thanks to modern technology, even large roof areas can be quickly and effectively inspected.

The MTA roof leakage detector can be extended through MTA IQM scanning in just a few steps. This system can quickly and effectively check for leaks in difficult to reach areas.

The MTA IQM scanning box is connected to the electronic equipment of the MTA roof leakage detector - the connection of 10 high sensitivity and sturdy measuring probes is located on the side of the box. The switch box of the MTA IQM scanning system can control the designed measurement probe and perform cross measurement.

MTA roof leakage detector area probe

The MTA roof leakage detector area probe can be used to check for leaks in areas with lower building heights. These areas can particularly be located under photovoltaic or solar systems.

The installation of this system not only involves sensitive intervention on the roof surface, but also has a negative impact on the sealing of the roof due to wind, weather, and significant heat loads. In anchoring, roof penetration, or sealing areas, small leaks are easily overlooked without appropriate equipment, and over time, the roof can become wet.

For example, with the help of the MTA roof leakage detector area probe, these leaks can be quickly and accurately located without the need to remove the photovoltaic panel. Simply connect the area probe to the electronic device of the MTA roof leakage detector and use it in just a few steps.

Innovative technology with minimal space

The compact design of electronic modules combined with modern Windows tablets forms the foundation for precise measurement.

The data can be viewed in real-time on the roof. On the other hand, integrated software can also be used to conduct subsequent evaluations of tests at any time.

Practical structure makes testing simple and efficient

All components and any accessories can be safely stored in the provided transport box

One probe - two measurement functions

The probes installed on the measuring vehicle are mainly used for area testing. If a leakage area is found during the area inspection process, it will be clearly displayed in the measurement program.

Suitable for all types of flat roofs

The MTA roof leakage detector has an innovative electromagnetic leakage measurement system that can achieve precise positioning. This makes it possible to locate leakage areas on all types of roof surfaces.

Highly developed technology is capable of making the most accurate measurements of various types of roof structures, including:

Cold and Warm Roofs

Inverted roof

Roof greening area

Travelable roof

Gravel roof